EcoPeel Microdermabrasion

EcoPeel is a Microdermabrasion system specifically designed for Beauty Clinics. The unit allows the therapist to improve the appearance of:

Fine Lines
White-heads (milea)
Stretch Marks
Mild Scarring
Rough Skin
Sun Damage / Hyper Pigmentation
Brightens Dull Skin

Microdermabrasion is a process where by a miniscule amount (40 microns - or 4 one hundredths of a millimeter) of the upper layer of the skins surface (the epidermis) is removed by mechanical means without penetrating or puncturing the epidermis. Many medical authorities have described it is a bridge between mild facial peels and laser resurfacing. Typically a series of 4-6 treatments are suggested.

EcoPeel is unique in that it provides 2 methods of microdermabrasion:

Crystal Kit: Involves the use of Corundum crystals, an inert and rough shaped fine crystals, that are fired at the skin via a precision hand piece and then vacuumed back up into a waste collection jar. Useful for fine controlled microdermabrasion on say mild scarring, but does require the use of the crystals as a consumable ( 8 to 10 treatments per jar of crystals). The Crystal kit includes a foot controlled boost switch which can be used to increase the flow of crystals for increased abrasion on certain areas as required.

Diamond Kit: A hand piece encrusted with small diamond chips is moved across the skins surface. The degree of suction through the centre of the hand piece tip controls the abrasion depth and vacuums up the waste material. A variety of tip sizes and grades (fine, medium & course) are available. The advantage of this method is that little to no consumables are required - the diamond tips can be cleaned, sterilized and re used many times before they need to be replaced. The Diamond Kit is suitable for general aesthetic treatments.

EcoPeel is available with one or both kits and either kit can be added at anytime.

Back to the top.

Fine Lines
White-heads (milea)
Stretch Marks
Mild Scarring
Rough Skin
Sun Damage / Hyper Pigmentation
Brightens Dull Skin
Reduces Sebum Production in Oily Skin

Process: Following an initial consultation with the client, Derm Aid protective eyewear is placed over the clients eyes. The appropriate kit is fitted to the machine and the treatment begins. The clients skin is fully cleansed. The hand piece is then moved across the clients skin with a conscious effort made to follow the lymphatic drainage channels. When treating the eye and neck area, vacuum pressure is reduced, and the skin is held taut so that any excess skin is not drawn up into the hand piece.

Excess crystals are removed with a brush and the skin is gently cleansed.

An optional post treatment ampoule & mask may be applied, the Eden Beauty Group recommend the Casmara Green Mask (http://www.mycasmara.com) which cools and soothes the skin. A Casmara Biological Soothing, Nourishing or Repairing Ampoule may also be applied. AFA SPF 30 sun block is then applied and aftercare is discussed with the client.

NOTE Full training is available with each unit, treatment processes may differ depending upon the area / issue being treated.

Back to the top.

Abrading methods	Corundum Crystals (AL₂O₃) and/or Diamond Encrusted Hand Piece(s).
Max vacuum	0.75 bar
Max pressure	2.5 bar
Working pressure	0.5 bar
Max air flow	30 l/min
Vacuum adjust	Electrical - 4 positions
Diamond hand piece life	100 treatments (sanitation required)
Crystal consumables	1 jar = 4 to 5 treatments
Crystal hand piece tip	Plastic disposable or Stainless steel re-useable (sanitation required)
Filters	Main: HEPA (re-useable) Waste collection: (disposable after 10 treatments)
Supply voltage	220V to 240V or 100 to 130V at 50/60Hz
Power absorption	280VA
Protection Class	1, type BF
Weight	8Kg
Max dimensions	240X440X220mm
Conformity to	CE, FDA standards

The system can be purchased with the Crystal Kit or with the Diamond Kit fitted as standard. Either kit can be added at any time.

All systems come with a 'Starter Pack'. This pack is designed to give you everything you need to get going with the machine i.e. training, brochures, consultation sheets, posters and suggested pricing.